Drinking method of hanging cables

2024-01-16

The lifting method used by the hanging cable: If the basket is used, the load can be guaranteed, because there is no lock -like behavior like a lock hanging, and the suspension cable can be flipped through the key points. It is recommended to use two cables together. The limb suspension is as vertical as possible, which is conducive to ensuring that the load is equally shared between branches. When a flat cable lock hanging, the state of the natural angle (120 °) should be allowed to avoid heat due to friction. Use a double lock hanging with a hanging cable. The double lock hanging guarantees safe and prevent load falling from the hanging cable.

To ensure that the safety of personnel pays close attention during the lifting process, and ensure the safety of personnel, it is necessary to warn the personnel in the dangerous state. If necessary, immediately withdraw from the dangerous area. The hand or other parts of the body must be far away from the suspender to prevent damage when the crane is relaxed. During the lifting process, a demonstration must be used to be suspended by a demonstration method. The hanging cable must be picked up from the sliced rope to the predetermined position. The friction is bearing the load when tightening.

If the rotation of the control load is tilted, the lifting object must be put down to ensure that the load is restrained and prevent the load from being guaranteed by accidents. Avoid collisions, drags, pulling, frictions, oscillations, and prevent the damage of the incorporate when hanging. You must pay attention to ensure that the load is restrained, prevent accidental flipping or collide with other objects. Avoid dragging, pulling, or oscillating loads, if that, it will increase the force of the incorporate. If the incorporates can not be dragged on the surface of the ground or the rough object on the surface of the ground or rough on the surface of the cable.

Next —

None

Back